AL-KO SF-19 2.2K TORSION SPECIAL ORDER

AL-KO SF-19  2.2K TORSION SPECIAL ORDER
Your price: $261.31
AL-KO SF-19 2.2K TORSION SPECIAL ORDER
 
This is a special order only axle. To order this axle, you will need to contact us with the following information.
 
1.) HUB FACE - MEASURE FROM THE CENTER OF THE RIGHT RIM TO THE CENTER OF THE LEFT RIM AS IF THE WHEELS WERE ON THE TRAILER.
 
2.) ANGLE OF THE SPINDLE - IS THE SPINDLE ABOVE THE AXLE - BELOW THE AXLE OR IS THE SPINDLE ARM HORIZONTAL WITH THE TRAILER?
 
3.) BRACKET TO BRACKET MEASURMENT - HOW MANY INCHES APART, ARE THE MOUNTING BRACKETS? ( SHOULD BE THE SAME WIDTH OF YOUR TRAILER FRAME)
 
The features of the AL-KO rubber suspension axle include the hexagonal outer tube which houses three separate rubber cords at each end of the axle. This provides 120 degree angles in which the rubber cord can roll. The wider angles optimize the shock absorption capability by allowing increased swing arm travel. This unique design is easily identifiable as an AL-KO product. As depicted here, the axle offers fully independent suspension and virtually eliminates side to side shock transfer. AL-KO offers capacities from 500 to 8,000 pounds per axle.
 
TORSION AXLE OPTIONS
 
BRACKET OPTION / PART # SF19-1
 
THIS IS TO CONVERT THE SF19 TO A SIDE MOUNT RATHER THAN THE STANDARD UNDER MOUNT
 
ULTRA LUBE / PART # SF19-2
 
THIS ITEM IS FOR THE SF19-3 HUB ASSEMBLY - IT ALLOWS FOR EASY AND FAST GREASE PACKING FOR THE BEARINGS - INSTEAD OF DIS-ASSEMBLING THE HUB AND BEARINGS, TO PACK THEM IN GREASE
 
HUB ASSY 440 BT9 *GALV* W/BRGS - PART # SF19-3
HUB ASSY 440 BT9  W/BRGS - PART # 004536
HOT DIPPED GALVANIZED PART # 004536G
SIZE - 1-1/16" - 1-1/16"
BEARINGS - INNER 44649 OUTER 44649
SEAL - 46757
HUB LENGTH SPINDLE # - BT-9
BOLT PATTERN - 4 ON 4"
GREASE CAP SIZE - 1.98
CAPACITY PER HUB - 1350 LBS.
 
ORDER THE ENTIRE PACKAGE OR MULTIPLE AXLES AND SAVE
48%
Details
Part Number:   SF19
Your price: $261.31
Options
Quantity
The product is not available for sale