Backpack Blower Rack Open/Enclosed Trimmertrap ST-2 / 051-240

• Complete installation by pulling the ball knob on the rack and lowering the sliding lip over the blower
• Blower is secured at top and bottom and will not move around
• Does not include Mounting Hardware
• Extremely fast in and and out time
• Locks with a Standard padlock
• Heavy gauge welded steel construction is plated for corrosion resistence
• Mounts on open or enclosed trailers
• Designed specifically for the Stihl 500 and 600 Series blowers
• Simply set blower on lower posts and pivot the top toward the rack, allowing the sliding lip to slide under the handle

The ST-2 can be installed on an enclosed trailer (shown below) by simply adding a spacer behind the upright bar in order to provide the proper offset from the wall to allow the slide mechanism to function properly.
Blower Rack holds Stihl 500, 550 & 600 series blowers

NOTE: Holds only STIHL 500 & 600 series ("Turtle" style blowers). Does not hold BR 300 & 400 series blowers .

The ST-2 can be installed on an enclosed trailer (shown below) by simply adding a spacer behind the upright bar in order to provide the proper offset from the wall to allow the slide mechanism to function properly.