Air Brakes & Kits

Air Brakes & Kits Corrosion Resistance is important on all types of trailers and of major consideration in salt water or other corrosive environments. Kodiak pioneered the use of brass fittings, stainless steel guide bolts and sleeves, and stainless steel pistons as standard items in trailer disc brake calipers. Kodiak rotors are offered with an automotive finish (as machined), E-coated, silver cadmium plated, and stainless steel (not available in integral hub/rotors). At a minimum, all Kodiak caliper castings and caliper mounting brackets are e-coated with options for silver cadmium plating or an all stainless steel product. Note: On a stainless steel caliper, all parts are stainless steel except for the fittings, which are brass, and the backing plate on the friction pads, which is zinc plated carbon steel. Removal of the rotor can be accomplished with little effort once the wheel and caliper have been removed. If either the rotor or the hub require replacement, the good component can be retained and re-installed, while the faulty component are replaced. With an integral (one piece) rotor/hub, the complete unit must be replaced. Installation of an “over the hub” rotor effectively increases the overall hub face to hub face dimension by approximately 1/2”. Wheel bolt thread length should be a consideration when installing an “over the hub” rotor. Easy to convert an idler axle to a disc brake axle with an “over the hub” rotor. 2/RCM-12-SS The industries only ALL STAINLESS STEEL BRAKE KIT! 12” rotor fits over standard 655 hub (not included) with 7-1/2” flange diameter. Caliper mounts to 5 bolt brake flange and fits inside 15" and larger wheels. 2/RCM-12-SCAD-SS 12” rotor fits over standard 655 hub (not included) with 7-1/2” flange diameter. Caliper mounts to 5 bolt brake flange and fits inside 15" and 16" wheels. 2/RCM-12-SCAD 12” rotor fits over standard 655 hub (not included) with 7-1/2” flange diameter. Caliper mounts to 5 bolt brake flange and fits inside 15" and 16" wheels. 2/RCM-12-E 12” rotor fits over standard 655 hub (not included) with 7-1/2” flange diameter. Caliper mounts to 5 bolt brake flange and fits inside 15" and 16" wheels. 2/RCM-12 12” rotor fits over standard 655 hub (not included) with 7-1/2” flange diameter. Caliper mounts to 5 bolt brake flange and fits inside 15" and 16" wheels. 2/HRCM-12-SCAD-SS Integral (one piece) hub and 12” rotor, 655 wheel bolt pattern. Caliper mounts to 5 bolt brake flange and fits inside 15" and 16" wheels. 2/HRCM-12-SCAD Integral (one piece) hub and 12” rotor, 655 wheel bolt pattern. Caliper mounts to 5 bolt brake flange and fits inside 15" and 16" wheels. 2/HRCM-12-E Integral (one piece) hub and 12” rotor, 655 wheel bolt pattern. Caliper mounts to 5 bolt brake flange and fits inside 15" and 16" wheels. 2/HRCM-12 Integral (one piece) hub and 12” rotor, 655 wheel bolt pattern. Caliper mounts to 5 bolt brake flange and fits inside 15" and 16" wheels.
AIR BRAKE-12.25X5.5 RH 10-16K AIR SPRING BRAKE KIT SINGLE AX AIR/HYD BOOSTER 8510 SERIES
AIR BRAKE-12.25X5.5 RH 10-16K
AIR SPRING BRAKE KIT SINGLE AX
AIR/HYD BOOSTER 8510 SERIES
Part Number: H9231551
Suggested Retail: $499.90
Your price: $353.60
29% save
Part Number: TA-601
Suggested Retail: $459.95
Your price: $431.41
6% save
Part Number: 006510
Suggested Retail: $1,249.95
Your price: $498.96
60% save
AIR/HYD BOOSTER FOR 8515&8516
AIR/HYD BOOSTER FOR 8515&8516
Part Number: 006515
Suggested Retail: $868.81
Your price: $498.96
43% save