Engine Identification 3

In order to obtain the correct replacement part(s), it is necessary to correctly identify the engine or piece of equipment. For replacement engine parts, the Model Number, Series or Type Number, and Serial Numbers are ALL needed. For equipment replacement parts, Model Numbers and Serial Numbers are needed to ensure proper replacement parts.

Locations for Engine Model Information:
• Stamped into the flywheel blower housing.
• Stamped into the crankcase above the oil filler cap.
• Stamped or printed on a tag located on the carburetor side of the blower housing.

Equipment model and serial number location:

These numbers are generally stamped into a metal tag which is attached to the main frame on the piece of equipment.

These are common locations. Please refer to the drawing for additional help in locating model information.

Briggs & Stratton
HP RATING MODEL NUMBERS
2.0
60100
3.0
62000, 80000, 82000, 83000, 90100, 92000
3.5
90000 thru 95000, 100000, 110000, 121700
3.75
96000, 98000
4.0
85000, 96000, 110000 thru 114000, 122000
5.0
99000, 104000, 124000, 126000, 128000,
130000 thru 132000, 133000, 135000
5.5
115000, 129000
6.0
133700, 135700, 146000
7.0
170000, 171000, 176000
8.0
190000 thru 195000
8.5
196700
9.0
123000, 161000, 185000, 233400
10.0
220000 thru 222000, 243000
11.0
251000 thru 255000
11.5
259700
12.0
280000, 281000, 282000
12.5
286000, 290000
13.0
302000, 28M707
14.0
260000, 261000, 287700, 400000, 400400, 400700
15.0
28N707, 28Q777
16.0
303000, 326000, 401400, 401700, 402400,
402700,
404400, 404700
18.0
350000, 350700, 421400, 421700, 422400,
422700
20.0
351000