Engine Identification 5

In order to obtain the correct replacement part(s), it is necessary to correctly identify the engine or piece of equipment. For replacement engine parts, the Model Number, Series or Type Number, and Serial Numbers are ALL needed. For equipment replacement parts, Model Numbers and Serial Numbers are needed to ensure proper replacement parts.

Locations for Engine Model Information:
• Stamped into the flywheel blower housing.
• Stamped into the crankcase above the oil filler cap.
• Stamped or printed on a tag located on the carburetor side of the blower housing.

Equipment model and serial number location:

These numbers are generally stamped into a metal tag which is attached to the main frame on the piece of equipment.

These are common locations. Please refer to the drawing for additional help in locating model information.

Kohler
HP RATING MODEL NUMBERS
4.9 K90, K91
5.0 K121, C5
6.0 K141, CH6
7.0 K160, K161
8.0 K181, M8
10.0 K241, M10
11.0 CV11
12.0 K301, M12
12.5 CV 12.5, CH12.5
14.0 K321, M14, CV14, CH14
16.0 K341, M16, MV16, CV16
17.0 KT17
18.0 K361, M18, MV18, CV18, CH18
19.0 KT19
20.0 K532, M20, MV20, CV20, CH20
21.0 KT21
22.0 CV22, CH22
23.0 K582
24.0 K660